SQ/2

The SQ/2 uses water-based or solvent-based inks to print reliably on a wide range of porous and non-porous surfaces

Run one or two printheads, choose from three printhead sizes, and easily install all components in the field

The patented SQ-60™ no-clog ink lets you leave ink in the printhead with no flushing required

An industrial-strength input device makes message programming quick and easy

Single or dual printhead operation
Run one or two printheads from the same controller to print on one or both sides of your product.
Easy message setup
User-friendly software guides you through simple prompts to program and save messages.
Low maintenance & field-upgradeable
Modular components, quick-swap printheads, and easy-replace PC cards and air modules keep downtime to a minimum.
Two ink options
Choose water-based ink for porous materials (corrugated, paper, etc.) or solvent-based ink for non-porous surfaces (plastics, wrap films, metals, and more).

Multiple printhead configurations
Available in ¾”, ½”, and ⅜” character heights.
Dual print matrix capability
All printheads can print in 7×5 or 5×5 dot-matrix formats, producing print sizes from ¼” to ¾”.
Fully field-installable
Components can be added or upgraded as your production needs evolve.

Heavy-duty steel construction ensures consistent operation in tough plant conditions.
Most repairs can be completed in under five minutes using modular, plug-and-play components—eliminating costly service calls.
Water-based models use Squid Ink’s patented SQ-60™ no-clog ink, allowing extended downtime without flushing or cleaning.